Description
2 ½ HP Water Chiller
- 25,000 BTU/hr
- 1″ NPT inlet/outlet ports (female threaded PVC)
- Titanium Heat Exchanger
- Recommended operating range ~40°F to ~100°F
- 61 dBA
- 6′ Power Cord / Nema 6-20P Plug
- 208 – 240 Volts / 11 Amps / 2,410 Watts
- 26.50”W x 25”D x 18.50”H
- 135 Pounds
- 1 Year Product Warranty
- Proudly made in the USA
Our 2.5 HP Water Chiller comes with a titanium heat exchanger. A titanium heat exchanger keeps copper from coming into contact with your water. Because toxic levels of copper can build up in water being used for long periods of time, copper heat exchangers aren’t recommended for use in a closed loop aquarium setup. The use of titanium = Reef Tank Safe!
Pump and Controller Recommendation
- Pump: Danner Mag-drive 500gph – 1800gph. Other pumps may be acceptable, however they need to be rated for less than 10psi max pressure. If you’re using a different pool/spa pump or any other pump rated in horsepower please talk with our tech support first. There is typically a simple work around that allows our chillers to provide cooling to systems which operate at higher pressures. We would be more than happy to help you determine the best method of installation for your system. Be sure and visit our “Accessories” web page to view our selection of pumps and accessory packages available.
- Digital Controller: The controller constantly monitors your systems incoming water temperature, therefore, water flow is needed at all times in order for it to successfully read current temperatures. When your systems water temperature moves above your desired set point, the controller tells the compressor and fan to turn on and begin cooling the water. Once your desired set point temperature is reached, the compressor and fan will turn off.
Water Chiller Comparison Chart
HP |
BTU/hr |
Voltage / Amps / Watts / Phase |
DIMENSIONS |
WEIGHT |
½ HP |
5,000 BTU/hr |
110 – 120V / 3.9A / 450W / Single |
16.25”W x 14.75”D x 12”H |
39 lbs |
½ HP HE |
5,750 BTU/hr |
110 – 120V / 3.9A / 450W / Single |
16.25”W x 14.75”D x 12”H |
40 lbs |
1 HP |
10,000 BTU/hr |
110 – 120V / 7.2A / 830W / Single |
19.25”W x 19.75”D x 14.25”H |
58 lbs |
1 HP HE |
11,500 BTU/hr |
110 – 120V / 7.2A / 830W / Single |
19.25”W x 19.75”D x 14.25”H |
60 lbs |
1 ½ HP |
15,000 BTU/hr |
110 – 120V / 11A / 1,270W / Single |
26.50”W x 23.75”D x 18”H |
96 lbs |
2 ½ HP |
25,000 BTU/hr | 208 – 240V / 11A / 2,410W / Single | 26.50”W x 25”D x 18.50”H |
135 lbs |
Additional Accessories Available
Penguin Chillers offers a wide variety of accessories and support equipment for our chillers.
Accessories offered:
- Water or Glycol pumps
- Quick Disconnects
- Vinyl or Silicone Tubing
- Propylene Glycol
- Pump Controller
- Accessory Packages
American owned and operated, Penguin Chillers manufactures a variety of chillers in Knoxville, TN. Purchase your chiller directly from us and we will continue offering you quality service throughout the life of your unit. If you need liquid of any sort cooled, we’re here to help. Contact us at Support@PenguinChillers.com.
Penguin Chillers current applications:
Drag Racing – Brewing – Bait Tanks – Marine & Reef Tanks – Distilling – Lobster Tanks – Wineries – Hydroponics – Cold Therapy – Aquaponics – Lasers – Research Science – Electroplating – Computers – Printing Presses – Injection Molding – Milk/Butter/Candy/Pasta/Food Production – Extractions – Craft Soda – Hyperbaric Chambers – Waste Water Treatment – Welding – 3d Printing
Dallas Kellerman (verified owner) –
Not only does Penguin Chiller offer an exceptional 2.5 HP water chiller, their service and customer support is phenomenal.
Even though the unit was well packaged, our unit received major damaged upon arriving due to shipper mishandling. Not only did Penguin take care of the shipping both ways, we had a new replacement unit in-house in just a few days…
Penguin Chiller, exceptional product and service.