2/3 HP XL Glycol Chiller

$1,599.99$1,939.99

Free CURBSIDE Shipping within the Continental 48 States.

Current Lead Time: 2-3 Weeks

  • 1 Year Product Warranty
  • Proudly made in the USA

Financing Available Click Here

Clear selection
Pay Over Time
 

Description

2⁄3 HP XL Glycol Chiller
  • 8 Gallon Reservoir (6.9 Gallon Actual)
  • 3,300 BTU/Hr @ 28°F
  • 56 dBA
  • 6′ Power Cord
  • 110 – 120 Volts / 3.9 Amps / 450 Watts
  • 18″W x 18″D x 31″H
  • 105 Pounds
  • 1 Year Product Warranty
  • Proudly made in the U.S.A.

Our XL line of Glycol Chillers are a series of chillers made using 304 Stainless Steel. The XL Glycol Chillers have significantly larger reservoirs and offer higher chilling capacities than our standard line does. Our XL line of chillers will handle up to 8 pumps at one time with 16 total openings to accommodate either 3/8″ ID or 1/2″ ID silicone tubing. Caps are provided to plug the openings not in use. There are also 2 additional openings to run your pump power cords through. The two-piece lid allows you to route tubing and cords through the rear section while having access to the tub through the front portion of the lid.

Our XL Glycol Chillers are suitable for applications down to about 5°F depending on the heat load. The built-in controller maintains the glycol temperature at its set point. This makes it ideal for the brewing market, along with many other low temperature applications. By adding a submersible pump, chilled glycol can be pumped out to equipment requiring cooling.

It’s our recommendation to use a 35% to 50% glycol to water mix ratio due to ease in calculating the mix and the buffer it provides. Depending on application (desired operating temperature/freeze point) you can use any combination of water to glycol mix ratio that you prefer however, it’s a standard practice for brewing applications to use a 35% to 50% glycol to water mix ratio. During our testing we used a 50% glycol to 50% water mix ratio which allowed us to achieve temperatures as low as negative -14°F without any freezing issues.

  • Mixing Example: 1 Gallon of Glycol + 1.75 Gallon of Water = 36.3% Glycol Mix.
  • 1.75 Gallons of liquid also equals 7 quarts or 14 Pints or 28 Cups of liquid.

While our chillers are perfect for maintaining fermentation temperatures or crash cooling, it’s not recommended to use them for dropping wort from boiling temperatures. It is a common practice to use either a 2-stage system where the chiller pre-cools the water which then cools the boiling wort or you can use water to drop the temps down to about 100°F, then switch over to using the chiller. NOTE: Glycol returning to the chiller should never be allowed to reach more than 100° Fahrenheit.

It is a typical scenario to use one pump per fermenter or vessel that you wish to cool. In this type of setup, each pump used will require its own individual controller allowing for the pump to be turned off and on independently of all other pumps. The controller on the Glycol Chiller itself will regulate the glycol temperature, (for example say 28°F) within that chiller. At the same time the controllers attached to each pump would regulate the temperature of that individual vessel independently by regulating the flow of 28°F glycol to that vessel.

Penguin Chillers is an American owned and operated company and we manufacture all of our chillers in Knoxville, TNOur chillers are used in a wide variety of applications that seem to be ever growing. By purchasing your chiller directly from us we can continue offering you quality service throughout the life of your unit. If you need liquid of any sort cooled, we’re here to help. Contact us at Support@PenguinChillers.com.


XL Chiller Comparison Chart

HP

Reservoir / Actual Volume

BTU/hr @ 28°F

Voltage / Amps / Watts / Phase

Width / Depth / Height

Weight

2/3 HP

8 gallon / 6.9 gal

3,300 BTU/hr @ 28°F

110 – 120V / 3.9A / 450W / Single

18″W x 18″D x 31″H

105 lbs

1 1/3 HP

17 gallon / 14.7 gal

6,350 BTU/hr @ 28°F

110 – 120V / 7.2A / 830W / Single

22″W x 22″D x 36″H

200 lbs

2 HP

26 gallon / 21.9 gal

10,000 BTU/hr @ 28°F

110 – 120V / 10.3A / 1,185W / Single

24″W x 24″D x 45″H

275 lbs

3 1/3 HP

30 gallon / 25.2 gal

16,250 BTU/hr @ 28°F

220 – 240V / 10.1A / 2,340W / Single

28″W x 28″D x 38″H

325 lbs


Sizing a Glycol Chiller for Brewing: These suggestions assume a decently insulated vessel (neoprene jacket or better) in a modest ambient temperature of 80°F. If your setup is uninsulated, or running in hotter ambient conditions you’ll need to allow for more BTU/hr. The cold crash is figured for about 18 hours so if you want a faster crash you’ll need to add more BTU/hr. When in doubt, use the suggestions for a vessel 1 – 2 sizes bigger than your actual size.


Size

Fermentation: ~65°F

Cold Crash:  from ~65°F down to ~35°F

Maintaining Cold: ~35°F

7 gal

60 BTU/hr

300 BTU/hr

120 BTU/hr

14 gal

90 BTU/hr

600 BTU/hr

180 BTU/hr

1 BBL

150 BTU/hr

1,000 BTU/hr

300 BTU/hr

2 BBL

300 BTU/hr

2,000 BTU/hr

600 BTU/hr

3 BBL

450 BTU/hr

3,000 BTU/hr

900 BTU/hr

5 BBL

600 BTU/hr

4,300 BTU/hr

1,125 BTU/hr

7 BBL

850 BTU/hr

6,000 BTU/hr

1,600 BTU/hr

10 BBL

1,100 BTU/hr

8,650 BTU/hr

1,900 BTU/hr

Applications currently using a Penguin Chiller include, but not limited to:

Marine & Reef Tanks – Distilling – Drag Racing – Bait Tanks – Brewing – Lobster Tanks – Wineries – Hydroponics – Cold Therapy – Aquaponics – Lasers – Research Science – Electroplating – Computers – Printing Presses – Injection Molding – Milk/Butter/Candy/Pasta/Food Production – Extractions – Craft Soda – Hyperbaric Chambers – Waste Water Treatment – Welding – 3d Printing

Reviews

There are no reviews yet.

Be the first to review “2/3 HP XL Glycol Chiller”

Your email address will not be published. Required fields are marked *

You may also like…

Glycol Pumps
Glycol Pumps

FREE SHIPPING on Orders Over $249 (Continental 48 States)  

$54.99$134.99 Select options
Wifi Pump Controller
Pump Controller – Wifi
FREE SHIPPING on Orders Over $249 (Continental 48 States)
  • Plug & Play Design
  • WIFI: IOS & Android
  • Supports both °C / °F
  • High/Low Temp Alarms
not rated $54.99 Add to cart
Silicone Tubing for Glycol Chillers
Silicone Tubing for Glycol Chillers
FREE SHIPPING on Orders Over $249 (Continental 48 States) Sold per foot, 10' minimum
$3.29$4.19 Select options
Propylene Glycol
Propylene Glycol
FREE SHIPPING on Orders Over $249 (Continental 48 States) 100% Propylene Glycol Food Grade
not rated $49.99$89.99 Select options
Sale! Glycol Chiller Accessory Package
Glycol Chiller Accessory Package
FREE SHIPPING on Orders Over $249 (Continental 48 States)
  • One Glycol Pump
  • One Glycol Pump Controller (Wi-Fi)
  • Four Quick Disconnects
  • 15' to 45' Silicone Tubing
  • 1 or 2 Gallons of Glycol (optional)
not rated $200.96$547.63 Select options